BulletShield

Retrofit UL 752 Bullet Resistant Glass Security Panels

Secure Your Glass with UL 752 Standard Bullet Resistant Polycarbonate

“Body Armor for Windows,” DefenseLite’s BulletShield polycarbonate shields offer impressive ballistic resistance at a fraction of the cost. Designed to protect the most targeted area of a building – the glass.

BulletShield bullet resistant glass security panels are:

  • Patented, professionally installed glazing security system
  • Retrofit existing windows, doors, storefronts and curtainwall
  • Customized solution that costs far less than full bullet-resistant reglaze

Bullet Resistant Window Overglaze System Deters Entry & Slows Active Shooters

BulletShield is an ideal bullet resistant glass solution for buildings most vulnerable to ballistic threats:

  • Commercial Buildings
  • Schools & Universities
  • Hospitals
  • Corporate Offices
  • Government Buildings & Police Stations
  • Retail Storefronts

Vented extrusion

Patented vented extrusion mounts to the existing glazing frame creating standoff for the polycarbonate shield from primary glass.

Super bond

“Super bond” anchoring method secures the engineered system to the existing glazing providing for unmatched flex, tensile and tear strength upon attack

Unbreachable

“Unbreachable” UV capped, clear polycarbonate shield is secured to the vented extrusion with security “flex” screws and elastomeric VHB tapes

Customized

Customized powder-coating creates full aesthetic integration with existing glazing upon retrofit installation

How BulletShield Bullet Resistant Polycarbonate Glass Security Panels Work

BulletShield is an overglaze that mounts onto existing window or door frames, creating a protective layer that mitigates ballistic attack through glass.

Each system is custom fabricated based on perceived threat levels, budgets, and existing glazing conditions. Installed by certified dealers, systems may utilize exotic plastics, polycarbonates, or glass-clad shields depending on performance requirements.

All-weather adhesives, high-performance films, VHB tapes, and mechanical security anchors may be used to install the system. BulletShield is independently tested to meet forced entry and UL 752 ballistic standards.

BulletShield FAQs

BulletShield is a retrofit, bullet-resistant, clear glass security shield that installs over existing window and door glass. BulletShield is Body Armor for Windows and independently tested to meet UL 752 ratings for ballistic protection.

BulletShield is installed over existing window and door glass by certified installers. Mounted either on the exterior or interior of current glass, BulletShield bullet resistant glass security panels anchor to existing windows to create a buffer zone between the primary glass and the BulletShield clear polycarbonate shield. Weather sealed and engineered for removal when needed, BulletShield is custom-made for every window opening and designed to blend in to the existing framing. BulletShield is nearly invisible upon a completed installation.

BulletShield can reduce street noise by up to 40 percent and improve energy efficiency of existing glass by more than 50 percent. BulletShield will defeat most attacks, while protecting the primary glass from breaking. BulletShield incorporates a proprietary sacrificial film coating on its surface that defeats graffiti tagging, while protecting the shield from damage.

BulletShield is available for installation across the US and can be purchased by contacting us via the form on the bottom of any page. Our friendly knowledgeable staff will start by helping you define your threat level and the appropriate BulletShield solution that does the job while fitting your budget.

BulletShield warranties range from a minimum of 2 years up to 15 years depending on the system installed. Custom warranties and service agreements are available.

Yes. BulletShield has been independently tested to UL752 standards and are ballistic rated. All ballistic test reports are available for review.

Professionally installed BulletShield systems are installed from $175-$450 per square foot, depending on required ballistic performance (UL Level), project size, location, and existing glazing conditions.

BulletShield is unique. Designed to protect existing window and door glass from ballistic attack, BulletShield is the perfect, customizable solution when fully rated ballistic glazing systems are either too expensive or not possible due to the existing conditions of the space you are aiming to fortify. BulletShield is not glass and will not fracture or ‘white-out’ during attack.

Yes, BulletShield has a program designed specifically for schools and campuses. Making schools safer for our children is the most important service we provide.

Yes. BulletShield has a program designed specifically for NSSF members. Like you, we want to keep stolen firearms off the streets, so we have discounted our installed systems for NSSF members to protect as many stores as possible.

Yes. Many NRF members are under relentless assault from violent criminals. BulletShield has special pricing, warranty and service agreements for all NRF members. Our aim is to promote the adoption of these products within the LP/AP community while stopping this violent crime.

Contact Us